Water Tanks

Precast Reinforced Plaster 

• Reliable storage of cool, clear and safe drinking water.

Unique Benefits:

• Strong.
• Durable.
• Will not burn or rust.
• Long and virtually maintenance free service life.

Hynds concrete water tanks provide reliable storage of cool, clear and safe drinking water in rural areas. Hynds tanks are strong and durable and will never burn or rust and are much less susceptible to damage caused by vandalism, or vermin. Hynds tanks offer a long and virtually maintenance free service life.

Elite Pump & Filtration System

• Ideal for medium to large size, single and multi-storey homes
• For household water supply and treatment

Unique Benefits:

• Fully waterproof
• UV light resistant

The Elite Pump & filtration system is a ready to install pump & water treatment package for the home owner. The outer box is manufactured from UV light resistant polyethylene that is fully water proof and can be locked.

• The unit comes with:
• Davey pump wtih Torrium controller.
• Two 10" Filterpure cartridge filters.
• Steriflo UV system.
• Non return and shut off valves.

   

 (Top)

Septic Tanks

We are an approved licenced installer – (click here to view certificate)
 

We supply and install 

• Tanks and Chambers
• Concrete Septic Tanks 
• Grease Traps 
• HDPE Grease traps 
• Oil and Grit Interceptor System 
• Retention Tanks 
• Septic Tanks

Advanced System

Hynds Lifestyle Systems are an elite range of aerated wastewater treatment systems that offer environmentally sensitive alternatives to the septic tank.

The Lifestyle 'Advanced' System is a single tank operation that combines cutting-edge electronic technology with traditional treatment methods to provide a clean, odourless liquid suitable for sustainable irrigation of landscaped gardens, bushes or trees.

 (Top)

Compact Systems The Lifestyle 'Compact' System separates the primary and secondary treatment process into two tanks. The secondary system is ideal for retrofitting to existing septic tanks or the entire system can be installed as a dual tank system.   Typical sites for Hynds Lifestyle Systems include rural or residential areas not connected to the sewer mains. The Lifestyle 'Compact' System is ideal for retrofitting to existing septic tanks. The dual-tank system is also suitable where site constraints restrict the use of a single-tank system.

 (Top)

Elite System

The Lifestyle ‘Elite’ system is designed for the larger home or multiple dwellings. This system separates the primary and secondary treatment process into two large tanks. The increased tank volumes also offer protection against high surge flows that can restrict the performance of the system.

Typical sites for Hynds Lifestyle Systems include rural or residential areas not connected to the sewer mains. The Lifestyle ‘Elite’ system is ideal for retrofitting to existing septic tanks.

(Top)

MBR

The MBR process utilizes the latest membrane bioreactor technology to offer the highest possible wastewater treatment level available.
 

The MBR System treats wastewater at an ultra filtration level, ensuring the highest standards are met. Treated effluent quality is typically better than 5:5:5 mg/l BOD5 Solids:Ammonia. Faecal Coliforms are kept at below 5/100ml and effluent is rendered free of pathogens, viruses and bacteria so no further disinfection is required.
 

Typical sites for MBR Systems include rural or residential areas not connected to the sewer mains, requiring a high level of wastewater treatment.
 

The use of drip line irrigation also makes the system perfect for areas with poorly draining soils, high water tables, limited space and steeply sloping sites.
 

In addition, Hynds Environmental offers treatment systems to replace or enhance failed septic tanks or trenches and prevent further damage to the environment.
 

Envirotank

The Hynds Envirotank is an advanced septic tank system for the collection and pre-treatment of household wastewater in areas without sewage reticulation.
 

Hynds Envirotank systems use a primary anaerobic settling process to lower both the suspended solids and the BOD5 of the wastewater, producing an effluent quality suitable for disposal to septic field drains.
 

The Hynds Envirotank system is suitable for rural or suburban areas not connected to the sewer mains, where primary treatment alone is acceptable. Typical sites include residential homes, farms, baches and lifestyle blocks.
 

(Top)

Stormwater

Up-FLO

Hynds Environmental’s Up-Flo™ Filter is the new standard in stormwater treatment.

Designed to meet the most stringent stormwater regulations by targeting a wide range of pollutants including gross debris, fine sediments, nutrients, metals, oils and grease, organics and bacteria, the Up-Flo™ Filter is a high rate, modular system that combines a patented upward flow path with a unique Drain Down system.

The multiple treatment capabilities of the Up-Flo™ Filter – settling, screening and filtration – make it the most effective and economical stormwater treatment system available.

From a simple retrofit application to standard manhole configurations or even large vault system installations, the Up-Flo™ Filter is the future of stormwater treatment.

The high removal efficiencies and inherent low headloss of the Hynds Up-Flo™ Filter allow for a small footprint making it a compact and economical solution for non-point source pollution.

(Top)

Downstream Defender

The Hynds Downstream Defender® is an advanced Hydrodynamic Vortex Separator that is designed to provide high removal efficiencies of settleable solids and floatables over a wide range of flow rates.

The high removal efficiencies and inherent low headloss of the Hynds Downstream Defender® allow for a small footprint making it a compact and economical solution for non-point source pollution.

The Hynds Downstream Defender's® small footprint makes it an ideal choice wherever stormwater treatment is required.

Installation locations include:

• Streets and roadways
• Parking areas
• New developments
• Construction sites
• Airports, car parks, restaurants and supermarkets

The Hynds Downstream Defender® can also be used as a pre-treatment device for detention systems, mitigating wetlands, swales, filters or other polishing systems.

(Top)

Downspout Filter

The Downspout Filter is a building-mounted filter designed to collect particulates, debris, metals, sediment, gravel and petroleum hydrocarbons from rooftop stormwater runoff.

All Downspout Filters are constructed of corrosion-resistant stainless steel. The working chamber of the system is made of a durable dual-wall geotextile fabric liner, encapsulating an absorbent that is easily replaced and provides for flexibility, ease of maintenance and economy.

Downspout Filters can be mounted onto the downspout pipes of any building.

Typical installation locations include: 

• Factories 
• Commercial buildings 
• Multi-story car parks 
• Office towers 
• Residential homes

(Top)

Sand Filter Systems

Hynds Sand Filter Systems have been developed to capture settleable solids, floatables, oils and grease from stormwater runoff. They are designed to comply with ARC TP10 which makes them easy to specify and easy to approve.

The two-stage treatment system creates a filter that achieves the highest treatment level available. More versatile than conventional stormwater treatment systems, Hynds Sand Filter Systems are an effective on-site alternative to detention ponds and swales.

The Hynds Sand Filter's small footprint makes it an ideal choice wherever stormwater treatment is required.

Installation locations include:

• Streets and roadways
• Parking areas
• New developments
• Shopping centres
• Truck stops
• Vehicle maintenance yards
• Industrial and commercial facilities

(Top)

Hydro-Brake Flow Control

The Hynds Hydro-Brake® Flow Control is a self-activating vortex flow control device that provides superior hydraulic performance over conventional flow regulators.

The unique head/discharge characteristics of the Hydro-Brake® can reduce on-site storage volume requirements by up to 30%, offering significant savings to the overall project costs.

This self-activating device uses vortex principles to control and attenuate stormwater flow without the need for moving parts or external power requirements.

With clear openings up to 600% larger than conventional flow control devices, the risk of blocking is reduced to an absolute minimum.

• Flow control for stormwater detention 
• Aeration of stormwater storage discharges 
• Catch basin inlet flow control 
• Capture and control of floatable trash 
• Erosion control and energy dissipation 
• Flow control for Sewer and Combined Sewer Overflow systems

(Top)